ABA 0769/N |
|
New starter motor assy.
|
850 - 1000 TC - CSA - TCR |
ABA 0769/R |
|
Rebuilt starter motor assy.
|
850 - 1000 TC - CSA - TCR |
ABA 0775/N |
|
New dynamo assy.
|
850 - 1000 TC |
ABA 0775/R |
|
Rebuilt dynamo assy.
|
850 - 1000 TC |
ABA 0793 |
|
Plug wire set in green "CAVIS" wire Ø 5mm.
|
850 - 1000 TC |
ABA 0795/A |
|
Ignition switch without starter.
|
850 - 1000 TC |
ABA 0795/B |
|
Ignition switch with starter.
|
850 - 1000 TC - CSA - TCR |
ABA 0942 |
|
Speedo cable, length 243cm.
|
850 - 1000 TC |
ABA 0948/TC |
|
ABARTH-JAEGER rev counter instrument Ø 120mm, scale: 8000 RPM.
|
850 - 1000 TC |
ABA 0949/TC |
|
ABARTH-JAEGER rev counter instrument Ø 120mm, scale: 10,000 RPM.
|
1000 CSA - TCR |
ABA 0952 |
|
ABARTH-JAEGER rev counter face Ø 120mm, scale: 8000 RPM.
|
850 - 1000 CSA |
ABA 0953 |
|
ABARTH-JAEGER rev counter face Ø 120mm, scale: 10,000 RPM.
|
1000 TCR |
ABA 0954 |
|
ABARTH-JAEGER rev counter face Ø 120mm, scale: 7000 RPM.
|
850 - 1000 TC |
ABA 0955 |
|
Speedo instrument Ø 105mm, scale: 160 KPH.
|
850 - 1000 TC |
ABA 0956 |
|
Speedo instrument Ø 105mm, scale: 200 KPH.
|
1000 CSA - TCR |
ABA 0957 |
|
ABARTH-JAEGER speedometer face Ø 105mm, scale: 160 KPH.
|
850 - 1000 TC - CSA |
ABA 0958 |
|
ABARTH-JAEGER speedometer face Ø 105mm, scale: 200 KPH.
|
1000 CSA - TCR |
ABA 0959/AL |
|
Alluminium instrument binnacle.
|
850TC-Nurburgring S.I |
ABA 0959/NR |
|
"Nurburgring" fibreglass instrument housing for three 105mm instruments.
|
850 TC Nurburgring |
ABA 0959/TCR |
|
Fibreglass instrument housing for two Ø 105mm instruments and one Ø 120mm.
|
850 - 1000 TC - CSA - TCR |
ABA 0960 |
|
Rev counter cable for use with distributor-mounted relay unit, length: 355cm.
|
850 - 1000 TC |
ABA 0961 |
|
Rev counter cable for use with timing case mounted relay unit, length: 400cm.
|
850 - 1000 CSA - TCR |
ABA 0965/D |
|
Rev counter drive unit for mounting on timing case cover. Right hand rotation.
|
850 - 1000 TC |
ABA 0965/S |
|
Rev counter drive unit for mounting on timing case cover. Left hand rotation.
|
1000 TCR |
ABA 0970/A |
|
SERIES 1 steering column switch with chrome levers.
|
850 - 1000 TC |
ABA 0970/B |
|
SERIES 2 steering column switch with plastic levers.
|
1000 CSA - TCR |
ABA 1387 |
|
Flat chromed instrument bezel Ø 120mm.
|
850 - 1000 TC - CSA - TCR |
ABA 1388 |
|
Flat chromed instrument bezel Ø 105mm.
|
850 - 1000 TC - CSA - TCR |
ABA 1394 |
|
SERIES 1 rebuilt starter motor assy.
|
850 TC |
ABA 1498 |
|
Light alloy dynamo pully.
|
850 - 1000 TC |
ABA 1536 |
|
Complete wiring harness.
|
850 - 1000 TC - CSA - TCR |
ABA 1628 |
|
Camshaft drive screw for use with ABA 0965/D-S.
|
850 - 1000 CSA - TCR |
ABA 1692 |
|
Rev counter drive assy for mounting below distributor assy.
|
850 - 1000 TC |
ABA 1830 |
|
Oil temperature instrument binnacle. Mounts in place of ashtray on dashboard.
|
850 - 1000 CSA - TCR |
ABA 1843 |
|
Alloy ring for mounting rev counter drive unit ABA 0965/D-S. This is mounted on the inside of the timing case cover.
|
850 - 1000 CSA - TCR |
ABA 1887 |
|
Light alloy distributor mount.
|
850 - 1000 CSA |
ABA 2089 |
|
Overhauled "MOTOROLA" alternator assy.
|
850 - 1000 CSA - TCR |
ABA 2165/P |
|
Combi instrument with water temperature, oil pressure, fuel guage. Ø 105mm.
|
850 - 1000 CSA - TCR |
ABA 2165/T |
|
Combi instrument with water temperature, oil temperature, fuel guage. Ø 105mm.
|
850 - 1000 TC |
ABA 2166/E |
|
Electric oil temperature instrument for mounting on dashboard in place of the ashtray. Ø 55mm.130°C scale.
|
850 - 1000 CSA - TCR |
ABA 2167 |
|
Oil pressure instrument for mounting on dashboard in place of the ashtray. Ø 55mm.
|
850 - 1000 CSA - TCR |
ABA 2224 |
|
Distributor cap.
|
850 - 1000 CSA - TCR |
ABA 2225 |
|
Points set.
|
850 - 1000 CSA - TCR |
ABA 2326 |
|
Distributor assy.
|
850 - 1000 CSA - TCR |
ABA 2327 |
|
Distributor assy complete with oil pump drive gear.
|
1000 TCR |
ABA 2345 |
|
Rev counter drive mounting kit for timing case cover. Includes: ABA 0961, ABA 1843, ABA 0965/D-S, ABA 1628.
|
850 -1000 TC - CSA - TCR |
ABA 2437 |
|
Light alloy pulley with removable "fan" for use with MOTOROLA alternator. Diameter fixing hole: 17mm. N° teeth: 32. 1965 →
|
850 - 1000 CSA - TCR |
ABA 2438 |
|
Light alloy pulley with removable "fan" for use with MOTOROLA alternator. Diameter fixing hole: 15mm. N° teeth: 32. 1965 →
|
850 - 1000 CSA - TCR |
ABA 2439 |
|
Light alloy pulley with removable "fan" for use with original FIAT dynamo. Diameter fixing hole: 12mm. N° teeth: 32 → 1965.
|
850 - 1000 TC |
ABA 2442 |
|
Motorola alternator mounting plate.
|
850 - 1000 CSA - TCR - 1000 Bialbero |
ABA 2508 |
|
Complete instrument binnacle.
|
850TC NURBURGRING |
ABA 2581 |
|
Toothed pully for dynamo.
|
850 - 1000 CSA |
ABA 2691 |
|
Wiper arm assy with Motor.
|
All |